参 考 文 献

Adeli, H. and Balasubramanyam, K. V., 1988, ``A Knowledge-Based System for Design of Bridge Trusses,'' Journal of Computing in Civil Engineering, Vol.2, No.1, pp.1-20.

Adeli, H. and Paek, Y. J., 1986, ``Computer-Aided Analysis of Structures in
INTERLISP Environment,'' Computers and Structures, Vol.23, No.3, pp.393-407.

Adelson, B., 1989, ``Cognitive Research: Uncovering How Designers Design; Cognitive Modeling: Explaining and Predicting How Designers Design,'' Research in Engineering Design, Vol.1, No.1, pp.35-42.

赤木 新介, 藤田 喜久雄, 1988, ``ネットワークモデルによる設計過程の支援 --エキスパートCADシステムにおける設計処理の機能--,'' 日本機械学会論文集(C編), Vol.54, No.505, pp.2300-2305.

赤木 新介, 藤田 喜久雄, 1990, 設計エキスパートシステムの基礎と応用, p.7, コロナ社.

赤木 新介, 1991, 設計工学(上) 3章 概念設計, pp.60〜138, コロナ社.

Alcantara, R. B., 1991, ``Representing the Engineering Design Process: Two Hypotheses,'' Computer Aided Design, Vol.23, No.9, pp.595-613.

Anumba, C. J. and Watson, A. S., 1992, ``An Innovative Approach Towards Designer-Oriented CAD Systems,'' The Structural Engineer, Vol.70, No.9, pp.160-169.

荒井 栄司, 赤阪 英和, 若松 栄史, 白瀬 敬一, 1998, ``CADにおける設計意図モデルと修正設計への適用,'' 日本機械学会論文集(C編), Vol.64, No.627, pp.4492-4497.

荒川 雅生, 萩原 一郎, 山川 宏, 1998, ``複数の許容設計解を得るための採餌適応戦略遺伝的アルゴリズム,'' 日本機械学会論文集(C編), Vol.64, No.622, pp.2155-2161.

有本 卓, 1976, 情報理論, p.39, 共立出版.

Atman, C. J., Chimka, J. R., Bursic, K. M., and Nachtmann, H. L., 1999, ``A
Comparison of Freshman and Senior Engineering Design Processes,'' Design
Studies, Vol.20, No.2, pp.131-152.

Bahler, D., Dupont, C., and Bowen, J., 1995, ``Mixed Quantitative/Qualitative Method for Evaluating Compromise Solutions to Conflicts in Collaborative Design,''
Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.9, No.4, pp.325-336.

Bardasz, T., 1992, ``Summary of Work in Case-Based Reasoning for Design,'' Workshop Note of AID' 92, Second International Conference on Artificial Intelligence in Design, pp.14-16.

Bardasz, T. and Zeid, I., 1993, ``DEJAVU: Case-Based Reasoning for Mechanical
Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.7, No.2, pp.111-124.

Bennett, D., 1996, The Architecture of Bridge Design, Introduction, p.8, Thomas Telford.

Bennett, J. S. and Engelmore, R. S., 1979, ``SACON: A Knowledge-Based Consultant for Structural Analysis,'' Proceedings of the Sixth International Joint Conference on Artificial Intelligence (IJCAI79), pp.47-49.

Boyle, J. M., 1989, ``Interactive Engineering Systems Design: A Study for Artificial Intelligence Applications,'' Artificial Intelligence in Engineering, Vol.4, No.2, pp.58-69.

Cagan, J. and Agogino, A. M., 1991, ``Inducing Constraint Activity in Innovative Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.5, No.1, pp.47-61.

Casakin, H. and Goldschmidt, G, 1999, ``Expertise and The Use of Visual Analogy: Implications for Design Education,'' Design Studies, Vol.20, No.2, pp.153-176.

Chakrabarti, A. and Thomas P. B., 1996, ``An Approach to Functional Synthesis of Mechanical Design Concepts: Theory, Applications, and Emerging Research
Issues,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.10, No.4, pp.313-331.

Coyne, R. and Snodgrass, A., 1993, ``Rescuing CAD from Rationalism,'' Design
Studies, Vol.14, No.2, pp.100-123.

Cross, N., 1993, ``Science and Design Methodology: A Review,'' Research in Engineering Design, Vol.5, No.2, pp.63-69.

Davis, W. H. (赤木 昭夫訳), 1990, Peirce's Epistemology (パースの認識論), 産業図書.

Dixon, J. R. and Simmons, M. K., 1983, ``Computers That Design: Expert Systems for Mechanical Engineers,'' Computers in Mechanical Engineering, Vol.2, No.3, pp.10-18.

Dixon, J. R., 1987, ``On Research Methodology Towards a Scientific Theory of
Engineering Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.1, No.3, pp.145-157.

Domeshek, E. A., 1992, ``Using Cases for Design Aiding,'' Workshop Note of AID '92, Second International Conference on Artificial Intelligence in Design, pp.24-26,

Domeshek, E. A. and Kolodner, J. L., 1993, ``Using The Points of Large Cases,''
Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.7, No.2, pp.87-96.

Dreyfus, H. L., 1979, (黒崎 政男, 村若 修訳 1992), What Computers Can't Do (コンピュータには何ができないか), p.512, 産業図書.

Duffy, A., 1986, ``Bibliography --Artificial Intelligence in Design,'' International
Journal for Artificial Intelligence in Engineering, Vol.2, No.3, p.173-179.

Dybara, T., Tecuci, G., and Rezazad, H., 1996, ``The Shared Expertise Model for Teaching Interactive Design Assistants,'' Engineering Application of Artificial
Intelligence, Vol.9, No.6, pp.611-626.

Elliot, W. S., 1989, ``Computer-Aided Mechanical Engineering: 1958-1988,'' Computer-Aided Design, Vol.21, No.5, pp.275-288.

Ferguson, E. S., 1992, (藤原 良樹, 砂田 久吉訳 1995), Engineering and The Mind's Eye (技術屋の心眼, 第1章 工学における設計の特質), pp.13-58, 平凡社.

Finger, S. and Dixon, J. R., 1989, ``A Review of Research in Mechanical Engineering Design. Part I: Descriptive, Prescriptive, and Computer-Based Models of Design Process,'' Research in Engineering Design, Vol.1, No.2, pp.51-67.

Garcia, A. C. B. and Howard, H. C., 1992, ``Acquiring Design Knowledge through Design Justification,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.6, No.1, pp.59-71.

Garrett Jr., J. H., 1998, ``The Computer-Aided Engineer: Prospects and Risks,''
Artificial Intelligence for Engineering Design, Analysis, and Manufacturing,
Vol.12, No.1, pp.61-64.

Gero, J. S., 1996, ``Special Issue: Artificial Intelligence in Computer-Aided Design: Progress and Prognosis,'' Computer Aided Design, Vol.28, No.3, pp.153-154.

Goel, V., 1994, ``A Comparison of Design and Nondesign Problem Spaces,'' Artificial Intelligence in Engineering, Vol.9, No.1, pp.53-72.

Goldberg, D. E., 1989, Genetic Algorithms in Search, Optimization and Machine Learning, Addison-Wesley.

Golding, A. R. and Rosenbloom, P. S., 1991, ``Improving Rule-Based Systems through Case-Based Reasoning,'' Proceedings of AAAI-91, pp.22-27.

Gorti, S. R. and Sriram, R. D., 1996, ``From Symbol to Form: A Framework for Conceptual Design,'' Computer Aided Design, Vol.28, No.11, pp.853-870.

Haftka, R. T., 1985, Elements of Structural Optimization, Martinus Nijhoff.

Hajela, P. and Lin, C.-Y., 1992, ``Genetic Search Strategies in Multicriterion Optimal Design,'' Structural Optimization, Vol.4, No.2, pp.99-107.

Hartmann, D. and Lehner, K., 1992, ``Non-Numerical Modeling Technique in Structural Optimization,'' Structural Optimization, Vol.4, No.3-4, pp.172-178.

長谷川 明, 1996, ``構造形態と人間感覚に関する考察,'' 土木学会 構造工学論文集, Vol.42A, pp.463-470.

Hauser, M. and Scherer, R. J., 1997, ``Application of Intelligent CAD Paradigms to
Preliminary Structural Design,'' Artificial Intelligence in Engineering, Vol.11, No.3, pp.217-229.

林 知己夫, 駒沢 勉, 1983, 数量化理論とデータ処理, 朝倉.

平井 敦, 1967, 鋼橋 III, 技報堂.

北郷 薫, 1972, 設計工学基礎, p.18, 丸善.

堀 浩一, 1991, ``設計とAIのかかわりの広がりと変化,'' 日本機械学会誌, Vol.94, No.877, pp.1010-1014.

Howard, H. C., Wang, J., Daube, F., and Rafiq, T., 1989, ``Applying Design-Dependent Knowledge in Structural Engineering Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.3, No.2, pp.111-123.

Hua, K., Schmitt, G., and Faltings, B., 1992, ``What Can Case-Based Design Do?'' Workshop Note of AID '92, Second International Conference on Artificial Intelligence in Design, pp.44-53.

池田 尚治(編), 19921994, 橋梁と基礎, Vol.26, No.1 Vol.28, No.1, 建設図書.

池上 高志, 1993, ``遺伝的アルゴリズムと創発的進化,'' 計測と制御, Vol.32, No.1, pp.63-68.

池本 文典, 川上 浩司, 小西 忠孝, 1996, ``新規設計における解候補の創出プロセスモデル,'' 計測自動制御学会論文集, Vol.32, No.10, pp.1447-1453.

伊東 孝, 1986, 東京の橋, p.98, 鹿島出版会.

伊藤 学, 1991, ``橋と景観・その概況,'' JSSC (特集 鋼橋と景観), No.2, pp.2-5.

岩田 一明監修（大阪科学技術センターCIM研究会編）, 1987, コンピュータ設計・製図 I --CAD/CAMの基礎--, 共立出版．

神藤 富雄, 1992, ``設計と感性工学(自動車開発を事例として),'' 日本機械学会 部門・関西支部第11回講習会 設計のためのニューテクノロジー 教材, pp.59-67.

Joshi, S. P., Umaretiya, J. R., and Joshi, S. B., 1991, ``Decision-Making in Preliminary Engineering Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.5, No.1, pp.21-30.

日本道路協会編, 1977, 橋の美 道路橋景観便覧, 丸善.

日本道路協会編, 1990, 道路橋年報(昭和61・62年度版), 丸善.

土木学会 構造工学委員会編, 1982, 美しい橋のデザインマニュアル, 土木学会.

日本鋼構造協会編, 1985, 鋼橋計画マニュアル, 日本鋼構造協会.

鴨野 一夫, 1992, ``あやとりはし,'' 橋梁と基礎, Vol.26, No.8, p.176.

関西道路研究会 道路橋調査研究委員会編, 1991, 人道橋の景観設計 その機能と美しさ, 鹿島出版会.

Kawaguchi, A., Motoda, H., and Mizoguchi, R., 1991, ``Interview-Based Knowledge Acquisition Using Dynamic Analysis,'' IEEE Expert, Vol.6, No.5, pp.47-60.

Kincaid, R. K., 1992, ``Minimizing Distorsion and Internal Forces in Truss Structures via Simulated Annealing,'' Structural Optimization, Vol.4, No.1, pp.55-61.

Kirkpatrick, S., Gellat, Jr., M., 1983, ``Optimization by Simulated Annealing,'' Science, Vol.220, No.4589, pp.671-680.

Kirsch, U., 1993, Structural Optimizations, Fundamentals and Applications, Springer-Verlag.

岸 義樹, 1992, ``設計における思考支援システムの研究 --Prologによる置換操作基礎モデル--,'' 精密工学会誌, Vol.58, No.5, pp.803-810.

小林 重信, 1993, ``特集にあたって (特集 遺伝的アルゴリズム),'' オペレーションズ・リサーチ, Vol.38, No.7, pp.328-329.

Kolodner, J. L., 1992, ``CBR for Design,'' Workshop Note of AID '92, Second International Conference on Artificial Intelligence in Design, pp.54-56.

Kolodner, J. L. and Wills, L. M., 1996, ``Powers of Observation in Creative Design,'' Design Studies, Vol.17, No.4, pp.385-416.

近藤 邦雄, 1989, ``デザインと人間の感性,'' 精密工学会誌, Vol.55, No.10, pp.1735-1740.

小西 一郎(編), 1977, 鋼橋 設計編 I, II, 丸善.

Lakmazaheri, S. and Rasdorf, W. J., 1989, ``Constraint Logic Programming for The Analysis and Partial Synthesis of Truss Structures,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.3, No.3, pp.157-173.

Leelawat, C., Niiro, T., and Kuribayashi, E., 1990, ``Application of Expert System in Bridge Superstructure Selections,'' Structural Engineering/Earthquake Engineering, Vol.7, No.1, pp.37-45.

Leonhardt, F., 1982, (田村 幸久監訳 1998), BRUCKEN/BRIDGES, p.9, メイセイ出版.

Levitt, R. E., 1998, ``Toward Analysis Tools for The Engineering Process,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.12, No.1, pp.13-28.

Lottaz, C., Stalker, R., and Smith, I., 1998, ``Constraint Solving and Preference
Activation for Interactive Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.12, No.1, pp.77-78.

Madanshetty, S. I., 1995, ``Cognitive Basis for Conceptual Design,'' Research in
Engineering Design, Vol.7, No.4, pp.232-240.

Maher, M. L., 1987, ``Expert Systems for Structural Design,'' Journal of Computing in Civil Engineering, Vol.1, No.4, pp.270-283.

Maher, M. L. and Zhang, D. M., 1993, ``CADSYN: A Case-Based Design Process Model,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.7, No.2, pp.97-110.

Maher, M. L., Gomez, S., and Garza, A., 1997, ``Case-Based Reasoning in Design,'' IEEE Expert --Intelligent Systems and Their Applications, Vol.12, No.2, pp.34-41.

Mark, W. S. and Simpson, R. L., 1991, ``Knowledge-Based Systems: An Overview,'' IEEE Expert, Vol.6, No.3, pp.12-17.

松田 聡浩, 吉村 忍, 矢川 元基, 平田 隆教, 西岡 正夫, 1998, ``ニューラルネットワークによる感性情報の定量化と満足化設計法,'' 日本機械学会論文集(C編), Vol.64, No.619, pp.1004-1012.

松本 勝, 白石 成人, 1991, ``風工学的観点からのアプローチ,'' JSSC (特集 鋼橋と景観), No.2, pp.16-25.

McLaughlin, S. and Gero, J. S., 1987, ``Acquiring Expert Knowledge from Characterized Designs,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.1, No.2, pp.73-87.

三木 光範, 杉山 吉彦, 内田 雄治, 1991, ``オブジェクト指向によるはりの変形解析,'' 日本機械学会論文集(A編), Vol.57, No.541, pp.212-217.

溝口 理一郎, 1991, ``設計問題の知識工学的考察,'' 機械の研究, Vol.43, No.1, pp.1-7.

Moore, C. J., Miles, J. C., and Rees, D. W. G., 1997, ``Decision Support for Conceptual Bridge Design,'' Artificial Intelligence in Engineering, Vol.11, No.3, pp.259-272.

森 典彦, 1991, デザイン工学 --ソフトシステムの設計計画--, 朝倉書店.

Morse, D. V. and Hendrickson, C., 1990, ``A Communication Model to Aid Knowledge-Based Design Systems,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.4, No.2, pp.99-115.

村瀬 邦茂, 大久保 守, 仲田 勝彦, 1992, ``唐木田大橋の計画・設計,'' 橋梁と基礎, Vol.26, No.11, pp.2-8.

長町 三生, 1988, ``感性の評価と情緒工学,'' 日本機械学会誌, Vol.91, No.838, pp.955-961.

長町 三生, 1989, 感性工学 感性をデザインに活かすテクノロジー, 海文堂.

永田 努, 畑村 洋太郎, 1993, ``設計者の思考過程を支援する設計データベースの構成,''
日本機械学会 第71期全国大会 講演論文集 (Vol. F), No.930-63, pp.166-168.

Nagy, R. L., Ulman, D. G., and Dietterich, T. G., 1992, ``A Data Representation for Collaborative Mechanical Design,'' Research in Engineering Design, Vol.3, No.4, pp.232-243.

仲 義輝, 小野里 雅彦, 住岡 晋一郎, 岩田 一明, 1997, ``設計・生産における組織的業務遂行に関する構造のモデリング,'' 日本機械学会論文集(C編), Vol.63, No.616, pp.4417-4423.

中島 尚正 (日本機械学会編), 1993, ``知的機械システムと人工物工学 (付記),'' 形態とデザイン, pp.267-271, 培風館.

中沢 弘, 松永 久, 清水 良樹, 1999, ``人間の設計過程のモデル化に関する研究 （第1報，優れた設計者の設計過程の分析）,'' 日本機械学会論文集(C編), Vol.65, No.631, pp.1266-1272.

成岡 昌夫, 伊藤 鉱一, (小西 一郎編), 1976, 鋼橋 設計編 II, 4章, 丸善.

成田 信之, 藤野 陽三, 宮田 利雄, 長井 正嗣, 1992, ``斜張橋国際セミナー報告, 橋梁と基礎, Vol.26, No.6, pp.24-28.

成瀬 勝武, 鈴木 俊男, 1981, 橋梁工学(鋼橋編), 森北.

Navinchandra, D., Sycara, K. P. and Narasimhan, S., 1991, ``A Transformational
Approach to Case-Based Synthesis,'' Artificial Intelligence for Engineering
Design, Analysis, and Manufacturing, Vol.5, No.1, pp.31-45.

Nishido, T., Maeda, K., and Nomura, K., 1990, ``Study on Practical Expert
System for Selecting The Types of River-Crossing Bridges,'' Structural Engineering/Earthquake Engineering, Vol.7, No.1, pp.239-250.

西川 一, 玉置 久, 1993, ``遺伝的アルゴリズムと最適化,'' オペレーションズ・リサーチ, Vol.38, No.7, pp.347-351.

野口 尚孝, 1994, ``クロス推論モデルを用いた工業デザイン発想支援システムの試み,''
精密工学会誌, Vol.60, No.2, pp.285-290.

尾形 説, 1992, ``知識エンジニアにおける知識獲得の実際,'' 情報処理, Vol.33, No.6, pp.620-622.

大木 直人, 田代 秀夫, 亀倉 龍, 横山 光男, 松下 温, 1992, ``個人の主観の相違を考慮したファジイデータベースの提案,'' 情報処理学会研究報告 人工知能, Vol.92, No.70, pp.21-29.

奥田 建三, 山崎 勝弘, 1990, ``事例ベース形推論とその応用例,'' 情報処理, Vol.31, No.2, pp.244-254.

折原 良平, 1993, ``発想支援システムの動向,'' 情報処理, Vol.34, No.1, pp.81-87.

Paek, Y. J. and Adeli, H., 1988, ``Representation of Structural Design Knowledge in a Symbolic Language,'' Journal of Computers in Civil Engineering, Vol.2, No.4, pp.346-364.

Petrie, C. J., Webster, T. A., and Cutkosky, M. R., 1995, ``Using Pareto Optimality to Coordinate Distributed Agents,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.9, No.4, pp.269-281.

Poon, J. and Maher, M. L., 1997, ``Co-evolution and Emergence in Design,'' Artificial Intelligence in Engineering, Vol.11, No.3, pp.319-327.

Prasad, N. M. V., Lander, S. E. and Lesser, V. R., 1996, ``The Role of Learning in Systems of Reusable Heterogeneous Design Agents,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.10, No.2, pp.163-165.

Perkins, D. N., 1994, ``Creativity: Beyond the Darwinian Paradigm,'' Dimensions of Creativity, Chap.5, (Boden, M. A. (ed.)), pp.119-142, MIT Press.

Pu, P. and Reschberger, M., 1991, ``Assembly Sequence Planning Using Case-Based Reasoning Techniques,'' Knowledge-Based Systems, Vol.4, No.3, pp.123-130.

Pu, P., 1993, ``Introduction: Issues in Case-Based Design Systems,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.7, No.2, pp.79-85.

Ramirez, M. R., 1996, ``Engineering Vision: Considerations in a Meaningful Approach to Conceptual Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.10, No.3, pp.199-214.

Reich, Y., 1993, ``A Model of Aesthetic Judgment in Design,'' Artificial Intelligence in Engineering, Vol.8, No.2, pp.141-153.

Reich, Y. and Fenves, S. J., 1989, ``The Potential of Machine Learning Techniques for Expert Systems,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.3, No.3, pp.175-193.

Rodgers, P. A. and Huxor, A. P., 1998, ``The Role of Artificial Intelligence as `Text' within Design,'' Design Studies, Vol.19, No.2, pp.143-160.

Sabouni, A. R. and Al-Mourad, O. M., 1997, ``Quantitative Knowledge Based
Approach for Preliminary Design of Tall Buildings,'' Artificial Intelligence in
Engineering, Vol.11, No.2, pp.143-154.

佐伯 彰一編, 1989, 図解 橋梁用語事典, 山海堂.

Salgado, N. K., Aliabadi, M. H., and Callan, R. E., 1997, ``Rule Inferencing and Object Orientation for Boundary Elements Mesh Design,'' Artificial Intelligence in Engineering, Vol.11, No.2, pp.183-190.

下郷 太郎, 1988, ``「感性と機械」小特集号発刊に際して,'' 日本機械学会誌, Vol.91, No.838, p.931.

Schlaich, J., 1992, ``Can Conceptual Design Be Taught?'' The Structural Engineer, Vol.70, No.9, pp.171-172.

Schnier, T. and Gero, J.S., 1996, ``Learning Representation for Creative Design Using Evolution,'' Artificial Intelligence for Engineering Design, Analysis, and
Manufacturing, Vol.10, No.2, pp.175-177.

瀬口 靖幸, 尾田 十八, 室津 義定, 1987, 機械設計工学2 [システムと設計], p.2, 培風館.

瀬口 靖幸, 田中 正夫, 山口 拓則, 1989, ``骨組構造物の概念設計支援の一つの試み (複数候補生成に基づく知識工学的アプローチ),'' 日本機械学会論文集(A編), Vol.55, No.520, pp.2533-2537.

関口 利昭, 寺田 和己, 椛木 洋子, 1994, ``新湘南バイパス(II期)平塚地区高架橋のデザイン,'' 橋梁と基礎, Vol.28, No.7, pp.7-11.

Smithers, T. and Troxell, W., 1990, ``Design is Intelligent Behaviour, But What's The Formalism?'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.4, No.2, pp.89-98.

Soo, V.-W. and Wang, T.-C., 1992, ``Integration of Qualitative and Quantitative
Reasoning in Iterative Parametric Mechanical Design,'' Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.6, No.2, pp.95-109.

Soufi, B. and Edmonds, E., 1996, ``The Cognitive Basis of Emergence: Implications for Design Support,'' Design Studies, Vol.17, No.4, pp.451-463.

Spangler, W.E., 1991, ``The Role of Artificial Intelligence in Understanding the Strategic Decision-Making Process,'' IEEE Transactions on Knowledge and Data
Engineering, Vol.3, No.2, pp.149-159.

Sriram, D., 1986, ``DESTINY: A Model for Integrated Structural Design,'' Artificial Intelligence, Vol.1, No.2, pp.109-116.

Stefik, M., 1981, ``Planning with Constraints (MOLGEN: Part 1),'' Artificial Intelligence, No.16, pp.111-140.

Subrahmanian, E., Konda, S. L., Levy, S. N., Reich, Y., Westberg, A. W., and Monarch, I., 1994, ``Equations aren't Enough: Informal Modeling in Design,''
Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol.7, No.4, pp.257-274.

多田 幸生, 1994a, ``設計への最適化手法の応用(1),'' 機械の研究, Vol.46, No.7, pp.717-721.

多田 幸生, 1994b, ``設計への最適化手法の応用(2),'' 機械の研究, Vol.46, No.8, pp.858-862.

鷹合 基行, 武田 英明, 西田 豊明, 1997, ``設計者のための統合的支援環境: Designers Amplifier,'' 日本機械学会 第7回設計工学・システム部門講演会講演論文集, No.97-69, pp.111-114.

高梨 隆雄, 1989, ``感性のメカニズム,'' 精密工学会誌, Vol.55, No.4, pp.649-650.

高梨 隆雄, 1991, ``設計美学に基づく機械設計方法,'' 日本機械学会 第69回全国大会講演会資料集 (Vol.D), No.910-62, pp.173-181.

高梨 隆雄, 1997, ``美的設計方法論,'' 第15回設計シンポジウム講演論文集, pp.38-43.

田浦 俊春, 1997, ``プロセス指向エンジニアリング技法の提唱,'' 第15回設計シンポジウム講演論文集, pp.33-37.

Takeda, H., Veerkamp, P., Tomiyama, T., and Yoshikawa, H., 1990, ``Modeling Design Processes,'' AI Magazine, Vol.11, No.4, pp.37-48.

寺野 隆雄, 1994, ``事例ベース推論と知的支援の研究動向,'' RC112 次世代計算力学システムに関する研究分科会 研究成果報告書, pp.332-342.

Thurston, D. L., 1991, ``A Formal Method for Subjective Design Evaluation with Multiple Attributes,'' Research in Engineering Design, Vol.3, No.3, pp.105-122.

辻野 克彦, 西田 正吾, 1995, ``知識獲得と機械学習の統合,'' システム/制御/情報, Vol.39, No.4, pp.159-166.

上田 完次, 1993, ``知能化生産システム --知識型知能化から創発型知能化へ,'' 精密工学会誌, Vol.59, No.11, pp.1755-1760.

上田 完次, 1995, ``人工物と生物指向パラダイム,'' 精密工学会誌, Vol.61, No.4, pp.493-496.

Ulrich, K. T. and Seering, W. P., 1989, ``Synthesis of Schematic Descriptions in
Mechanical Engineering,'' Research in Engineering Design, Vol.1, No.1, p.3-18.

Verstijnen, I. M. and Hennessey, J. M., 1998, ``Sketching and Creative Discovery,'' Design Studies, Vol.19, No.4, pp.519-546.

Visser, W., 1996, ``Two Functions of Analogical Reasoning in Design: A Cognitive-Psychology Approach,'' Design Studies, Vol.17, No.4, pp.417-434.

Wang, W. and Gero, J. S., 1997, ``Sequence-Based Prediction in Conceptual Design of Bridges,'' Journal of Computing in Civil Engineering, Vol.11, No.1, pp.37-43.

鷲津 久一郎, 宮本 博, 山田 嘉昭, 山本 善之, 川井 忠彦, 1981, 有限要素法ハンドブック 基礎編, 培風館.

Welch, R. V. and Dixon, J. R., 1994, ``Guiding Conceptual Design Through Behavioral Reasoning,'' Research in Engineering Design, Vol.6, No.3, pp.169-188.

柳生 孝昭, 1995, ``人工物工学の課題 --設計論とabductionを中心に--,'' 精密工学会誌, Vol.61, No.4, pp.497-500.

山口 智治, 白石 圭子, 小野 典彦, 翁長 健治, 1989, ``プランニング過程の類似性に着目した類推的問題解決,'' 情報処理学会研究報告 知識工学と人工知能, Vol.89, No.22, pp.69-75.

山川 宏, 1994, 最適化デザイン (計算力学とCAEシリーズ 9), 培風館.

山本 秀彦, 藤本 英雄, 1993, ``生産システム設計支援システムにおける知識獲得 (工作機械に関する知識ベース獲得),'' 日本機械学会 第71期全国大会 講演論文集 (Vol. F), No.930-63, pp.134-136.

山中 俊治, 1994a, ``人工物工学と設計の美学 --アブダクション, プレゼンテーションと美的感覚の関わり--,'' 日本機械学会誌, Vol.97, No.908, pp.575-578.

山中 俊治, 1994b, ``デザインの工学における心と感性,'' 計測と制御, Vol.33, No.3, pp.186-191.

山岡 孝行, 西田 正吾, 1996, ``設計意図を考慮にいれた事例ベース設計支援,'' 電子情報通信学会論文誌 A, Vol.J79-A, No.2, pp.175-186.

山岡 俊樹, 1996, ``エルゴノミクスと感性設計,'' 日本機械学会誌, Vol.99, No.928, pp.199-202.

横井 俊夫, 相場 亮, 1989, ``制約ロジック・プログラミング --知識処理への新しいパラダイム--,'' 情報処理, Vol.30, No.1, pp.29-38.

吉川 弘之, 1979, ``一般設計学序説 --一般設計学のための公理的方法--,'' 精密機械, Vol.45, No.8, pp.906-912.

Zienkiewicz, O. C. and Morgan, K., 1982, Finite Elements and Approximation, John Wiley & Sons.